API 5CT N80 R3 Casing Steel Pipe for Oil Well

Shop API 5CT N80 R3 Casing Steel Pipe for Oil Well at our factory. High-quality, durable, and reliable pipes for your drilling needs. Order now!

Request a Quote
  • API 5CT N80 R3 Casing Steel Pipe for Oil Well
  • API 5CT N80 R3 Casing Steel Pipe for Oil Well
  • API 5CT N80 R3 Casing Steel Pipe for Oil Well

PRODUCTS DETAILS

Casing and tubing widely used for oil and gas develop, Casing and tubing are essential components in the oil and gas industry used for the extraction and transportation of hydrocarbons (oil and natural gas) from underground reservoirs to the surface. They play crucial roles in ensuring the safety, integrity, and efficiency of drilling and production operations. Tubing is a kind of pipeline used to transfer the crude oil and natural gas from the oil layer or gas layer to the ground after the drilling is finished. Tubing can allows the pressure generated during the extraction process. Tubing produced as the same way as casing, but the process called "upsetting" is additionally needed to thicken the tubing pipe. Casing is used to protect the boreholes that have been dug into the ground for oil. Used same as the drill pipe, oil well casing pipes also allow the axial tension pressure, so high-quality high-strength steel is required. OCTG casings are large diameter pipes that are cemented into the borehole.The packaging method for steel pipes involves cleaning, grouping, wrapping, bundling, securing, labeling, palletizing (if necessary), containerization, stowing, sealing, transportation, and unpacking. Different kinds of steel pipes and fittings with different packing methods. This comprehensive process ensures that the steel pipes shipping and arrive at their destination in optimal condition, ready for their intended use.
API 5L:  GR.B, X42, X46, X52, X56, X60, X65, X70, X80
API 5CT:  J55, K55, N80, L80, P110
API 5D: E75, X95, G105, S135
EN10210: S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355K2H
ASTM A106: GR.A, GR.B, GR.C
ASTM A53/A53M: GR.A, GR.B
ASTM A335: P1, P2, 95, P9, P11P22, P23, P91, P92, P122
ASTM A333: Gr.1, Gr.3, Gr.4, Gr.6, Gr.7, Gr.8, Gr.9.Gr.10, Gr.11
DIN 2391: St30Al, St30Si, St35, St45, St52
DIN EN 10216-1: P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2
JIS G3454: STPG 370, STPG 410
JIS G3456: STPT 370, STPT 410, STPT 480
GB/T 8163: 10#, 20#, Q345
GB/T 8162: 10#, 20#, 35#, 45#, Q345
Raw Material Checking, Chemical Analysis, Mechanical Test, Visual Inspection , Tension Test, Dimension Check, Bend Test , Flattening Test, Impact Test, DWT Test, NDT Test, Hydrostatic Test, Hardness Test….. Marking, Painting before delivery.Steel pipes serve as the backbone of modern industrial and civil engineering, supporting a wide array of applications that contribute to the development of societies and economies worldwide. The steel pipes and fittings we Womic Steel produced widely used for petroleum, gas, fuel & water pipeline, offshore /onshore, sea port construction projects & building, dredging, structural Steel, piling and bridge construction projects, also precision steel tubes for conveyor roller production, ect... Casing and tubing Standard Grades: API 5CT J55,K55,L80, N80,P110, C90, T95, H40 API 5CT casing and tubing pipe ends : (STC)Short round thread casing (LC)Long round thread casing (BC)Buttress thread casing (XC)Extreme-line casing (NU)Non-upset tubing (EU)External upset tubing (IJ)Integral joint tubing The casing and tubing should be delivery according to above the connections with standard of API5CT / API Standards.
Labels a Outside diameter D mm Nominal linear mass b, c T&C kg/m Wall thickness t mm Type of end-finish
1 2 H40 J55 K55 M65 L80 C95 N80 Type 1,Q C90 T95 P110 Q125
1 2 3 4 5 6 7 8 9 10 11 12 13
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 9.50 10.50 11.60 13.50 15.10 114,30 114,30 114,30 114,30 114,30 14,14 15,63 17,26 20,09 22,47 5,21 5,69 6,35 7,37 8,56 PS — — — — PS PSB PSLB — — PS PSB PLB PLB — — — PLB PLB — — — PLB PLB — — — PLB PLB — — — PLB PLB PLB — — — — PLB
5 5 5 5 5 5 5 11.50 13.00 15.00 18.00 21.40 23.20 24.10 127,00 127,00 127,00 127,00 127,00 127,00 127,00 17,11 19,35 22,32 26,79 31,85 34,53 35,86 5,59 6,43 7,52 9,19 11,10 12,14 12,70 — — — — — — — PS PSLB PSLBE — — — — PS PSLB PLB PLB PLB — — — — PLBE PLBE PLB PLB PLB — — PLBE PLBE PLB PLB PLB — — PLBE PLBE PLB PLB PLB — — PLBE PLBE PLB PLB PLB — — — PLBE PLB PLB PLB
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 14.00 15.50 17.00 20.00 23.00 26.80 29.70 32.60 35.30 38.00 40.50 43.10 139,70 139,70 139,70 139,70 139,70 139,70 139,70 139,70 139,70 139,70 139,70 139,70 20,83 23,07 25,30 29,76 34,23 39,88 44,20 48,51 52,53 56,55 60,27 64,14 6,20 6,98 7,72 9,17 10,54 12,70 14,27 15,88 17,45 19,05 20,62 22,22 PS PS PSLBE PSLBE PS PSLB PLB PLB PLB — — PLBE PLBE PLBE — — — — — — — PLBE PLBE PLBE PLBE PLBE PLBE P P P P P P P PLBE PLBE PLBE — — — — PLBE — — — — — —
6-5/8 6-5/8 6-5/8 6-5/8 20.00 24.00 28.00 32.00 168,28 168,28 168,28 168,28 29,76 35,72 41,67 47,62 7,32 8,94 10,59 12,06 PS — — PSLB PSLBE — PSLB PLB PLB — — PLBE PLBE PLBE — PLBE PLBE PLBE — PLBE PLBE PLBE — PLBE PLBE PLBE — — PLBE
7 7 7 7 7 7 7 7 7 7 7 7 7 17.00 20.00 23.00 26.00 29.00 32.00 35.00 38.00 42.70 46.40 50.10 53.60 57.10 177,80 177,80 177,80 177,80 177,80 177,80 177,80 177,80 177,80 177,80 177,80 177,80 177,80 25,30 29,76 34,23 38,69 43,16 47,62 52,09 56,55 63,54 69,05 74,56 79,77 84,97 5,87 6,91 8,05 9,19 10,36 11,51 12,65 13,72 15,88 17,45 19,05 20,62 22,22 PS PS — — — — — — — — — — — — PS PSLBE PSLBE — — — — — — — — — — PS PLB PLB PLB PLB — — — — — — — — — PLBE PLBE PLBE PLBE PLBE PLBE — — — — — — — PLBE PLBE PLBE PLBE PLBE PLBE — — — — — — — PLBE PLBE PLBE PLBE PLBE PLBE P P P P P — — — PLBE PLBE PLBE PLBE PLBE — — — — — — — — — — — PLBE PLBE — — — — —
See notes at end of table.
Labels Outside diameter D mm Nominal linear masses a, b Wall thick- ness t mm Type of end finish c
Non- upset T&C kg/m Ext. upset T&C kg/m Integ. joint kg/m
1 2
NU T&C EU T&C IJ H40 J55 L80 N80 Type 1,Q C90 T95 P110
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1.900 1.900 1.900 1.900 1.900 2.40 2.75 3.65 4.42 5.15 — 2.90 3.73 — — 2.40 2.76 — — — 48,26 48,26 48,26 48,26 48,26 — 4,09 5,43 6,58 7,66 — 4,32 5,55 — — 3,57 4,11 — — — 3,18 3,68 5,08 6,35 7,62 PI PNUI PU — — PI PNUI PU — — — PNUI PU P P — PNUI PU — — — PNUI PU P P — PNUI PU P P PU — —
2.063 2.063 3.24 4.50 — — 3.25 — 52,40 52,40 — — — — 4,84 — 3,96 5,72 PI P PI P PI P PI P PI P PI P P
2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 4.00 4.60 5.80 6.60 7.35 4.70 5.95 7.45 60,32 60,32 60,32 60,32 60,32 5,95 6,85 8,63 9,82 10,94 6,99 8,85 11,09 4,24 4,83 6,45 7,49 8,53 PN PNU PN PNU PN PNU PNU P PU PN PNU PNU — — PN PNU PNU P PU PN PNU PNU P PU PNU PNU
2-7/8 2-7/8 2-7/8 2-7/8 6.40 7.80 8.60 9.35 6.50 7.90 8.70 9.45 — — — 73,02 73,02 73,02 73,02 9,52 11,61 12,80 13,91 9,67 11,76 12,95 14,06 — — — 5,51 7,01 7,82 8,64 PNU — — PNU — — PNU PNU PNU PU PNU PNU PNU — PNU PNU PNU PU PNU PNU PNU PU PNU PNU PNU —
2-7/8 2-7/8 10.50 11.50 73,02 73,02 15,63 17,11 9,96 11,18 P P P P P P
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 7.70 9.20 10.20 12.70 14.30 15.50 17.00 — 9.30 — 12.95 — — — — — — — — — — 88,90 88,90 88,90 88,90 88,90 88,90 88,90 11,46 13,69 15,18 18,90 21,28 23,07 25,30 — 13,84 — 19,27 — — — — — — — — — — 5,49 6,45 7,34 9,52 10,92 12,09 13,46 PN PNU PN — — — — PN PNU PN — — — — PN PNU PN PNU P P P PN PNU PN PNU — — — PN PNU PN PNU P P P PN PNU PN PNU P P P — PNU — PNU — — —
4 4 4 4 4 4 9.50 10.70 13.20 16.10 18.90 22.20 — 11.00 — — — — — — — — — — 101,60 101,60 101,60 101,60 101,60 101,60 14,14 — 19,64 23,96 28,13 33,04 — 16,37 — — — — — — — — — — 5,74 6,65 8,38 10,54 12,70 15,49 PN PU — — — — PN PU — — — — PN PU P P P P PN PU — — — — PN PU P P P P PN PU P P P P — — — — — —
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 12.60 15.20 17.00 18.90 21.50 23.70 26.10 12.75 114,30 114,30 114,30 114,30 114,30 114,30 114,30 18,75 22,62 25,30 28,13 32,00 35,27 38,84 18,97 6,88 8,56 9,65 10,92 12,70 14,22 16,00 PNU PNU PNU P P P P P P PNU — — — — — — PNU P P P P P P PNU P P P P P P
P = Plain end, N = Non-upset threaded and coupled, U = External upset threaded and coupled, I = Integral joint.
♦ Nominal linear masses, threads and coupling (col. 2, 3, 4) are shown for information only. ♦ The densities of martensitic chromium steels (L80 types 9Cr and 13Cr) are different from carbon steels. The masses shown are therefore not accurate for martensitic chromium steels. A mass correction factor of 0,989 may be used. ♦ Non-upset tubing is available with regular couplings or special bevel couplings. External-upset tubing is available with regular, special-bevel, or special clearance couplings.
Labels a Outside diameter D mm Nominal linear mass b, c T&C kg/m Wall thickness t mm Type of end-finish
1 2 H40 J55 K55 M65 L80 C95 N80 Type 1,Q C90 T95 P110 Q125
1 2 3 4 5 6 7 8 9 10 11 12 13
7-5/8 7-5/8 7-5/8 7-5/8 7-5/8 7-5/8 7-5/8 7-5/8 7-5/8 7-5/8 24.00 26.40 29.70 33.70 39.00 42.80 45.30 47.10 51.20 55.30 193,68 193,68 193,68 193,68 193,68 193,68 193,68 193,68 193,68 193,68 35,72 39,29 44,20 50,15 58,04 63,69 67,41 70,09 76,19 82,30 7,62 8,33 9,52 10,92 12,70 14,27 15,11 15,88 17,45 19,05 PS PSLBE PSLB PLB PLB PLBE PLBE PLBE PLBE PLB PLB PLB PLBE PLBE PLBE PLBE PLB PLB PLB PLBE PLBE PLBE PLBE PLB PLB PLB P P PLBE PLBE PLBE PLB PLB PLB PLBE PLB PLB PLB
7-3/4 46.10 19,685 6,860 1,511 P P P P P
8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 24.00 28.00 32.00 36.00 40.00 44.00 49.00 219,08 219,08 219,08 219,08 219,08 219,08 219,08 35,72 41,67 47,62 53,57 59,53 65,48 72,92 6,71 7,72 8,94 10,16 11,43 12,70 14,15 PS PS — — — — PS — PSLBE PSLBE — — — PS PS PSLB PSLB PLB — — — — — PLBE PLBE PLBE PLBE — — — PLBE PLBE PLBE PLBE — — — PLBE PLBE PLBE PLBE — — — — PLBE PLBE PLBE — — — — — — PLBE
9-5/8 9-5/8 9-5/8 9-5/8 9-5/8 9-5/8 9-5/8 9-5/8 9-5/8 9-5/8 9-5/8 32.30 36.00 40.00 43.50 47.00 53.50 58.40 59.40 64.90 70.30 75.60 244,48 244,48 244,48 244,48 244,48 244,48 244,48 244,48 244,48 244,48 244,48 48,07 53,57 59,53 64,73 69,94 79,62 86,91 88,40 96,58 104,62 112,50 7,92 8,94 10,03 11,05 11,99 13,84 15,11 15,47 17,07 18,64 20,24 PS PS — — — — — — — — — — PSLB PSLBE — — — — — — — — — PSLB PSLB PLB PLB — — — — — — — — PLBE PLBE PLBE PLBE PLB — — — — — — PLBE PLBE PLBE PLBE PLB — — — — — — PLBE PLBE PLBE PLBE PLB P P P P — — — PLBE PLBE PLBE PLB — — — — — — — — PLBE PLBE PLB — — — —
10-3/4 10-3/4 10-3/4 10-3/4 10-3/4 10-3/4 10-3/4 10-3/4 10-3/4 10-3/4 32.75 40.50 45.50 51.00 55.50 60.70 65.70 73.20 79.20 85.30 273,05 273,05 273,05 273,05 273,05 273,05 273,05 273,05 273,05 273,05 48,74 60,27 67,71 75,90 82,59 90,33 97,77 108,93 117,86 126,94 7,09 8,89 10,16 11,43 12,57 13,84 15,11 17,07 18,64 20,24 PS PS PSB PSBE PSBE PSB PSB PSB PSB PSBE PSBE PSBE PSBE PSBE PSBE PSBE PSB P P P PSBE PSBE PSBE PSB PSBE PSB
11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 42.00 47.00 54.00 60.00 65.00 71.00 298,45 298,45 298,45 298,45 298,45 298,45 62,50 69,94 80,36 89,29 96,73 105,66 8,46 9,53 11,05 12,42 13,56 14,78 PS — — — — PSB PSB PSB — — PSB PSB PSB — — — — PSB P P — — PSB P P — — PSB P P — — PSB P P — — PSB P P
13-3/8 13-3/8 13-3/8 13-3/8 13-3/8 48.00 54.50 61.00 68.00 72.00 339,72 339,72 339,72 339,72 339,72 71,43 81,10 90,78 101,19 107,15 8,38 9,65 10,92 12,19 13,06 PS — — — — — PSB PSB PSB — — PSB PSB PSB — — — — PSB PSB — — — PSB PSB — — — PSB PSB — — — PSB PSB — — — — PSB
See notes at end of table.
Labels a Outside diameter D mm Nominal linear mass b, c T&C kg/m Wall thickness t mm Type of end-finish
1 2 H40 J55 K55 M65 L80 C95 N80 Type 1,Q C90 T95 P110 Q125
1 2 3 4 5 6 7 8 9 10 11 12 13
16 16 16 16 65.00 75.00 84.00 109.00 406,40 406,40 406,40 406,40 96,73 111,61 125,01 162,21 9,53 11,13 12,57 16,66 PS PSB PSB P PSB PSB P P P P
18-5/8 87.50 47,308 13,021 1,105 PS PSB PSB
20 20 20 94.00 106.50 133.00 508,00 508,00 508,00 139,89 158,49 197,93 11,13 12,70 16,13 PSL — — PSLB PSLB PSLB PSLB PSLB — — — — — — — — — — — — — — — —
P = Plain end, S = Short round thread, L = Long round thread, B = Buttress thread, E = Extreme-line.
♦ Labels are for information and assistance in ordering. ♦ Nominal linear masses, threaded and coupled (col. 2) are shown for information only. ♦ The densities of martensitic chromium steels (L80 types 9Cr and 13Cr) are different from carbon steels. The masses shown are therefore not accurate for martensitic chromium steels. A mass correction factor of 0,989 may be used.
Labels Outside diameter D mm Plain-end linear mass kg/m Wall thickness t mm
1 2
1 2 3 4 5
3-1/2 4 4-1/2 5 5-1/2 6-5/8 9.92 11.35 13.05 17.95 19.83 27.66 88,90 101,60 114,30 127,00 139,70 168,28 14,76 16,89 19,42 26,71 29,51 41,18 7,34 7,26 7,37 9,19 9,17 10,59

Hot Products

ASTM A192, ASTM A179, ASTM A209, ASTM A210 Steel Boiler tubes

ASTM A192, ASTM A179, ASTM A209, ASTM A210 Steel Boiler tubes

API 5L ASTM A106 A333 or A335 Seamless Carbon Steel Pipes

API 5L ASTM A106 A333 or A335 Seamless Carbon Steel Pipes

API 5CT Carbon Steel Drilling Pipe for drill projects

API 5CT Carbon Steel Drilling Pipe for drill projects

API 5L Seamless Steel Pipeline for oil gas

API 5L Seamless Steel Pipeline for oil gas

SANS 657-3, EN 10305, DIN 2391 High Precision Steel Pipes

SANS 657-3, EN 10305, DIN 2391 High Precision Steel Pipes

Seamless Stainless Steel Pipes

Seamless Stainless Steel Pipes

ASTM A795 Hot-Dip Galvanized ERW Grooved Steel Pipe

ASTM A795 Hot-Dip Galvanized ERW Grooved Steel Pipe

ASME/ANSI B16.5 & B16.47 - Steel Pipe Flanges and Flanged Fittings

ASME/ANSI B16.5 & B16.47 - Steel Pipe Flanges and Flanged Fittings

Square & Rectangular tubes

Square & Rectangular tubes

ASME B16.9 A234 WPB Butt Weld Carbon Steel Tee

ASME B16.9 A234 WPB Butt Weld Carbon Steel Tee

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours